ONKYO BD-SP809 Manuel du propriétaire télécharger pdf (Page 43)

11.3 HDMI Output

[HOME ] → “Settings” → “HDMI” → “HDMI Output”

You can set the video and audio output settings from

HDMI OUT MAIN and SUB jacks.

“Main”

Outputs both of video and audio signals from

HDMI OUT MAIN jack only.

“Dual (Main and Sub)”

Outputs video and audio signals from both of

HDMI OUT MAIN and HDMI OUT SUB jacks.

“AV Split (Main:V, Sub:A)”

Outputs video signals from HDMI OUT MAIN jack and

audio signals from HDMI OUT SUB jack.

D Note

• To enable “HDMI Output”, it is necessary that both

HDMI OUT MAIN and HDMI OUT SUB jacks are

connected with other HDMI devices and this unit

should obtain EDID (Extended Display Identification

Data).

• When “HDMI Output” is set to “Main”, there

will be no output from the HDMI OUT SUB jack.

• HDMI video resolution will normally be as selected in

“Video Resolution” except when “HDMI Output” is

set to “Dual (Main and Sub)” and “Video Resolution”

is set to “Source Direct” or “Auto”. When the

unit is set to these settings video and audio from

HDMI OUT MAIN and SUB jacks will be the same by

EDID.

• When playing 3D contents with the unit set to

“AV Split (Main:V, Sub:A)”, a compatible display device

and AV receiver/amplifier must be connected to the

unit. Without a compatible device audio output will

not occur.

• When set to “HDMI Output”, unplugging the

HDMI OUT MAIN or HDMI OUT SUB jack will clear

settings.

• Only remove HDMI cables when this unit is in standby

mode. Do not unplug cables when outputting video

and audio signals from HDMI OUT MAIN and SUB

jacks.

• The video output from HDMI OUT SUB jack and

the video output which “HDMI Output” is set to

“Dual (Main and Sub)” are not THX certified.

11.4 Video Resolution

[HOME ] → “Settings” → “HDMI” → “Video Resolution”

Set the resolution of the video signal being output from

the HDMI OUT jack.

You can select the desired “Video Resolution” among the

settings listed below:

“Auto”, “480i”, “480p”, “720p”, “1080i”,

“1080p”, “1080p/24”, “Source Direct”.

Actual Output Resolution by Media:

Setting in the

“Video Resolution”

Source

480i/60 720p/60 1080i/60 720p/24 1080p/24

480i 480i/60

480p 480p/60

720p 720p/60

1080i 1080i/60

1080p 1080p/60

1080p/24 1080p/60

1080p/24

Source Direct

HDMI video resolution will be set to the

recorded resolution of a playback media.

Auto

The highest or recommended resolution

supported by your display device will be in

effect automatically. “Auto” is affected by the

“HDMI Auto Format” setting.

The table below describes the available output resolution

when “Video Resolution” is set to “Source Direct”.

Media

Source

480i 480p 720p 1080i 1080p

1080p24

BD-video ΟΟΟΟΟΟ

AVCHD ΟΟΟΟΟ –

DVD-video Ο –––––

JPEG – ΟΟ – Ο –

DLNA Video ΟΟΟΟ ––

: available – : not exist

• Composite video output (VIDEO) jack can only output

480i.

• For AVCHD, outputting the video in 24 frames per

second (1080p/24) is not available.

• Even if “Video Resolution” is set to “Source Direct”,

HDMI video resolution will be changed when your TV

is not compatible with the video resolution of a disc

material.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

ONKYO BD-SP809 Manuel du propriétaire Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray ONKYO BD-SP809