Onkyo A-9555 Manuel d'utilisateur télécharger pdf (Page 17)

Enjoying Audio Sources—Continued

You can use the A-9755 as power ampliﬁer with a sepa-

rate preamp. See page 13 for connection information.

Notes:

• You can record on a recorder that’s connected to the

MD OUT or TAPE OUT L/R jacks.

• The tone controls have no effect on the signal being

recorded.

• When using the A-9755 as a power ampliﬁer (MAIN

IN function), recording is not possible.

Using the MAIN IN Function (A-9755

only)

Press the [POWER AMP DIRECT

(MAIN IN)] button for 3 seconds

until the MAIN IN indicator lights up.

The MAIN IN function comes on and

the MAIN IN indicator lights up.

While the MAIN IN function is on,

only audio from components con-

nected to the preamp can be output.

To turn the MAIN IN function off,

press the [POWER AMP DIRECT

(MAIN IN)] button for 3 seconds until

the MAIN IN indicator goes off.

Notes:

• Do not connect a component that

does not have an output volume con-

trol to the MAIN IN jacks and use the

MAIN IN function, because the

sound will be output at maximum

volume and may damage the A-9755

and your speakers.

• While the MAIN IN function is on,

the A-9755’s Volume control has no

effect. Before you turn off the

MAIN IN function, make sure that

the Volume control is not turned up

high, to prevent any loud surprises.

• While the MAIN IN function is on,

the following A-9755 functions are

disabled:

- Volume control

- Input selector

- Remote control operation

- function

- LOUDNESS control

- Recording

- Muting

Operate the connected preamp for

some of these functions including

controlling volume, selecting input,

and muting. The [STANDBY] and

[ON] buttons on the remote control-

ler will work even when the MAIN

IN function is on.

POWER AMP DIRECT (MAIN IN)

Recording

Use the input selector to select

the component that you want to

record from.

Prepare the recorder:

• Set the recorder so that it’s ready for

recording.

• If necessary, adjust the recording

level on the recorder.

• See the recorder’s manual for more

information.

Start playback on the component

selected in step 1.

Note:

If you select another input source dur-

ing recording, the newly selected input

source will be recorded.

Unless you have the full consent of the

using your recordings for anything other

than personal enjoyment!

Input selector

1 2 ... 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Onkyo A-9555 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteurs et amplificateurs Onkyo A-9555